It can act most prominently as a hydrophobizing or olephobizing agent for virgin, recycled or printed paper. Papcoat™ Aquaseal - containing paper preservation agents - can be printed, painted, rolled or sprayed.
For a full range effectiveness and durability 20 g/m² of undiluted Papcoat™ Aquaseal are necessary. That amount can be applied by either one-step or multi-step procedures, depending on the absorptiveness of the wood substrate. In a spray application it is mandatory to minimize the generation of Aerosol emissions by suited procedures (e.g. application of HPLV spray processes, air driven low pressure spray processes. Consecutive application steps should be carried out wet-in-wet as a dried coat of Papcoat™ Aquaseal will almost immediately exhibit a strong repelling effect. Consequently a second application step would therefore be much less effective.
Before considering the use of Papcoat™ products please read its Safety Data Sheet (SDS) thoroughly for safety and toxicological data as well as for information on proper transportation, storage and use. The Safety Data Sheet is available after registration on our website www.papcoat.co or upon request from your local representative, customer service or from Papcoat™ Product Safety Department, E-MAIL sds-inquire@pacoat.co
Before considering the use of Papcoat™ products please read its Safety Data Sheet (SDS) thoroughly for safety and toxicological data as well as for information on proper transportation, storage and use. The Safety Data Sheet is available after registration on our website www.papcoat.co or upon request from your local representative, customer service or from Papcoat™ Product Safety Department, E-MAIL sds-inquire@pacoat.co
